LXG型螺旋鋅粉給料機技術參數
Parameter of the screw zinc powder feeder

螺旋鋅粉給料機是我公司新研制的一種鋅粉給料機械，主要有以下優點：a、采用調速電機，可以方便醒目地隨意調整；b、螺旋給料均勻連續，解決了傳統機械鋅粉加入量調整困難，加入量不均勻的問題，降低了殘鋅的含量，既降低了氰化成本，又改善了冶煉效果；c、鋅粉暴露在空氣中的面積小，減少了鋅粉在使用過程中的氧化，改善了置換效果。

The main products are belt zinc dust feeder, disk zinc dust feeder, and spiral zinc feeder. Amongst them, the last, a new generation of zinc dust feeder developed by Xinhai, has the following advantages：(a). Because of the speed governing motor being used, the feeding rate of zinc dust may be conveniently adjusted at will. (b).The spiral feeder keeps the feeding to be smooth and continuos, which solves the difficulty and problem in adjustment of the feeding rate by traditional mechanical zinc dust feeder and uneven feeding, Residual zinc dust is reduced, cyanidation cost lowered down, and smelting effect improved. (c). Due to less zinc is exposed to the open air, oxi-dation of the zinc dust durin the operation is reduced, improving precipitation.